|
Page 3 of 4  | | When installing the 3-d panel roof panels, the panel is lifted over the wire mesh angles and fastened in place from the under side. Another wire mesh angle is fastened to the top side of the 3-d panel. | 
| | Bond beams are created when a re-bar is installed over large openings to reinforce the concrete walls. This can be done by removing the foam core and installing re-bar. | 
| | Shoring is required on the underside of the ceilings. I recommend spacing the shoring every four feet under the roof panels. | 
| | Wiring can be placed behind the wire mesh and should be incased in flex tubing or conduit. |
|
Projects